DG407DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SOIC |
| Weight | 792.000628mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 450mW |
| Number of Outputs | 2 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Nominal Supply Current | 50μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5Ohm |
| Drain to Source Resistance | 100Ohm |
| Height | 2.34mm |
| Length | 17.91mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
DG407DW Overview
Presented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 8:1. Operation at a temperature around -40°C~85°C TA. As a result of its 2 channels, this electronic component provides high-quality output. A 2 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the 28 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 44V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 7.5V. A voltage higher than 500μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 5V. There is a voltage range of 15V operating voltages for the electrical part. The electrical component supports 16 inputs. In an environment with a temperature higher than 85°C, the digital switches should not operate. There is 100Ohm Drain to Source resistance on this electronic part. A analog switch ics with 2 outputs is included. There is a 28-SOIC package available from suppliers.
DG407DW Features
2 Channels
Drain-to-Source resistance: 100Ohm
DG407DW Applications
There are a lot of Vishay Siliconix DG407DW Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- High-Voltage
- Audio and video signal routing
- Medical systems
- Audio and video routing
- Signal routing between systems
- Private Branch Exchange (PBX)
- Multi-Line E1 Interface Cards
- Digital Cross-Connects
- PDAs
