DG407DW-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Operating Supply Current | 30μA |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Signal Current-Max | 0.03A |
| Height | 2.34mm |
| Length | 17.91mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG407DW-E3 Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 28 terminations totally. Due to its 8 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 28 pins are injected into the body of the electronic part. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with DG407. A 100Ohm internal resistance characterizes this multiplexer. The functions of 28 pins can be found in the datasheets. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. An effective Dual, Single supply digital multiplexer. 7.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 30μA current would be sufficient. It may damage the digital multiplexer if the voltage is higher than 500μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. When using dual power supplies, you should attach at least 5V. This electrical part is compatible with 15V operating voltages. The electrical component supports 16 inputs.
DG407DW-E3 Features
8 Channels
30μA Supply Current
DG407DW-E3 Applications
There are a lot of Vishay Siliconix DG407DW-E3 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- RGB switches
- Wireless Local Loop
- Medical Instrumentation
- Battery Powered Instruments
- Cell phones
- Precision instrumentation
- Audio and video routing
- Cellular phones
- E1 Multiplexer
