DG407DYZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Operating Supply Voltage | 18V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Propagation Delay | 450 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Off-state Isolation-Nom | 69 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG407DYZ Overview
Shipping overseas is convenient due to the electrical component's packing in SOIC. High reliability is provided by advanced packaging method Bulk. In total, 28 terminations have occurred. By its 16 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 28 pins are injected into the body of the electronic part. There are 2 circuits in this switch device. As far as internal resistance is concerned, it has 100Ohm. You can find the functions of the 28 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. This multiplexer would work with 80μA current. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 5V voltage attached. It can operate from 18V operating voltages. In an environment with a temperature higher than 85°C, the digital switches should not operate.
DG407DYZ Features
16 Channels
80μA Supply Current
DG407DYZ Applications
There are a lot of Intersil (Renesas Electronics America) DG407DYZ Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Low-Voltage
- Signal routing between systems
- HDTV
- Transmit
- Isolation
- Residential Gateways, Home Gateway/Router
- Cable Modem
- Cellular phones
- DVD-R
