DG407EWI+T
| Parameters | |
|---|---|
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
DG407EWI+T Overview
Presented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. A total of 28 terminations have been recorded. A electrical component with 8 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 28 pins. A 2 circuit is present in this switch device. Using the DG407 search parameter, you can discover variants of the switch. It has an internal resistance of 175Ohm. Datasheets for 28 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 30V. An effective Dual, Single supply digital multiplexer. It is recommended to use 5V as the lowest voltage for the electrical part. For this digital switch to work, 500μA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIn the case of dual power supplies, you should connect at least 4.5V. This electrical part is compatible with 28V operating voltages.
DG407EWI+T Features
8 Channels
500μA Supply Current
DG407EWI+T Applications
There are a lot of Maxim Integrated DG407EWI+T Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Digital access cross connects
- Precision test equipment
- Video switching
- ISDN NT1/TA
- Data Acquisition Systems
- T1/E1 Terminals
- SONET
- Sample-and-hold systems
- Multiplexers
