DG408CUE+
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 755mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG408 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Throw Configuration | DPST |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 26pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 225ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
DG408CUE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Extended operating temperature around 0°C~70°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG408. It has an internal resistance of 175Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 500μA current would be sufficient. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 5V. Operating voltages range from 28V.
DG408CUE+ Features
8 Channels
500μA Supply Current
DG408CUE+ Applications
There are a lot of Maxim Integrated DG408CUE+ Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- USB 1.1 signal switching circuits
- Medical
- Public switching systems
- Battery Powered Instruments
- Fault Tolerant Systems
- Communication systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- E1 Network Equipment
- Video switching
