DG408DJ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 20V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 75 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 40Ohm |
| Signal Current-Max | 0.02A |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG408DJ Overview
Shipping overseas is convenient with the electronic component packed in DIP. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. There are 1 circuits in this switch device. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. For functions related to 16 pins, please refer to the datasheets. A analog switch ic that has a cost-effective Dual, Single supply type. The analogue multiplexer could operate on 200μA current. There is also ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY to look out for in this electronic part. A temperature above 85°C is not suitable for operation of the analogue multiplexer. It has a Drain to Source resistance of 40Ohm ohms. This digital multiplexer requires 5V voltage as a minimum supply voltage.
DG408DJ Features
8 Channels
200μA Supply Current
Additional Features: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
Drain-to-Source resistance: 40Ohm
DG408DJ Applications
There are a lot of Intersil (Renesas Electronics America) DG408DJ Analog Switches & Multiplexers ICs applications.
- FTTH
- Cellular phones
- Fault Tolerant Systems
- Wireless Local Loop
- Avionics and Military Systems
- Low-Voltage
- Central office
- Optical Applications
- USB 1.1 signal switching circuits
- Audio and video routing
