DG408DYZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Voltage | 32V |
| Interface | Logic |
| Number of Circuits | 1 |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 10μA |
| Throw Configuration | DPST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 9V |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG408DYZ Overview
As the electronic part is packed in SOIC, international shipping is convenient. High reliability is provided by advanced packaging method Bulk. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits number 1 make up this analogue multiplexer. A 100Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. A voltage higher than 34V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. 5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 200μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. The voltage should be at least 5V if you are using dual power supplies. This electrical part is compatible with 28V operating voltages. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY. It is not recommended to operate the switches in an environment with a temperature higher than 85°C.
DG408DYZ Features
8 Channels
200μA Supply Current
Additional Features: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
DG408DYZ Applications
There are a lot of Intersil (Renesas Electronics America) DG408DYZ Analog Switches & Multiplexers ICs applications.
- Avionics
- Digital Cross-Connects
- Battery Powered Instruments
- Channel Banks
- Cable PC
- Multi-Line E1 Interface Cards
- New designs requiring multiplexer functions
- Precision test equipment
- Sample-and-hold systems
- Medical Instrumentation
