DG408DYZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Throw Configuration | DPST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG408DYZ-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. Advanced packaging method Tape & Reel is used to provide high reliability. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electronic part body is injected with 16 pins. There is 100Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 34V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. The switch device would be able to operate with 200μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIt is recommended that you attach at least 5V to your dual power supply. 28V operating voltages can be used with this electrical part. The 8 inputs need to be operated in order to work. Additional features include: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer.
DG408DYZ-T Features
1 Channels
200μA Supply Current
Additional Features: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
DG408DYZ-T Applications
There are a lot of Intersil (Renesas Electronics America) DG408DYZ-T Analog Switches & Multiplexers ICs applications.
- DVD-R
- Isolation
- Digital cross connects (DSX-1)
- Data switching
- Private Branch Exchange (PBX)
- Cable Modem
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Wireless Local Loop
- SDH/SONET multiplexers
- CSU
