Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Number of Circuits |
1 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Voltage - Supply, Single/Dual (±) |
5V~30V ±5V~20V |
Supply Current-Max (Isup) |
2mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
100Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
3pF 26pF |
On-state Resistance Match-Nom |
1.5Ohm |
Switch Time (Ton, Toff) (Max) |
150ns, 150ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
225ns |
Switch-off Time-Max |
300ns |
Signal Current-Max |
0.03A |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
Non-RoHS Compliant |
DG408EUE Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. There are 1 circuits in this multiplexer. The analog multiplexer shown here is a typical Multiplexer or Switches. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
DG408EUE Features
8 Channels
DG408EUE Applications
There are a lot of Maxim Integrated DG408EUE Analog Switches & Multiplexers ICs applications.
- Isolation
- Multiplexers
- Fault Tolerant Systems
- FTTH
- Transmit
- Intelligent PBX
- Audio and video signal routing
- HDTV
- Sample-and-hold systems
- Switching Systems