DG408LAK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 29Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Current-Max (Isup) | 0.7mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 29Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 20pF |
| Switch Time (Ton, Toff) (Max) | 55ns, 25ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 55ns |
| Switch-off Time-Max | 40ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DG408LAK Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 16 pins are injected into the body of the electronic part. A total of 1 circuits make up this switch device. Internally, this switch multiplexer has a resistance of 29Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. 3V is the lowest voltage that should be fed to the electronic electronic part. Despite this switch device's dual supply capability, its voltage should not exceed 6V. A dual power supply should have at least 3V voltage attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
DG408LAK Features
8 Channels
DG408LAK Applications
There are a lot of Vishay Siliconix DG408LAK Analog Switches & Multiplexers ICs applications.
- Cable PC
- Audio/video switches
- USB 1.1 signal switching circuits
- ATM
- Video switching
- Optical Applications
- Transmit
- Medical systems
- Channelized and Unchannelized DS3 applications
- E1 Network Equipment
