Parameters |
Switch Time (Ton, Toff) (Max) |
55ns, 25ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-82dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
45ns |
Signal Current-Max |
0.03A |
Height |
1.55mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
547.485991mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
17Ohm |
Additional Feature |
VIDEO APPLICATION |
Max Power Dissipation |
600mW |
Technology |
BICMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DG408 |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
700μA |
Power Dissipation |
600mW |
Max Supply Current |
500μA |
Turn On Delay Time |
150 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±3V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
150 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
29Ohm |
Min Dual Supply Voltage |
3V |
High Level Output Current |
30mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
7pF 20pF |
DG408LDY-T1-E3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. This multiplexer is composed of 1 circuits. Search with DG408 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 17Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 2.7V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 700μA current. The analogue multiplexer may be damaged if voltage is greater than 500μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. The voltage should be at least 3V if you are using dual power supplies. Additional features include: VIDEO APPLICATION.
DG408LDY-T1-E3 Features
8 Channels
700μA Supply Current
Additional Features: VIDEO APPLICATION
DG408LDY-T1-E3 Applications
There are a lot of Vishay Siliconix DG408LDY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- ATM
- Residential Gateways, Home Gateway/Router
- Industrial control systems
- SDH/SONET multiplexers
- Voice over IP/DSL – Integrated Access Devices, Smart
- Optical Applications
- Medical Instrumentation
- Low-Voltage
- DVD-R