DG408LEDQ-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 23Ohm |
| Terminal Finish | PURE MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 23Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5.5pF 25pF |
| Switch Time (Ton, Toff) (Max) | 72ns, 47ns |
| Charge Injection | -11pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -98dB @ 100kHz |
| Switch-on Time-Max | 80ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DG408LEDQ-T1-GE3 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. Due to its 8 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 1 circuits make up this switch device. Internally, this switch multiplexer has a resistance of 23Ohm. You can find the functions of the 16 pins in the datasheets. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
DG408LEDQ-T1-GE3 Features
8 Channels
DG408LEDQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG408LEDQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- E1 Network Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Medical Instrumentation
- RGB switches
- E1 Multiplexer
- DSLAMs
- 65 V DACs
- Battery Powered Instruments
- Fault Tolerant Systems
