DG409AK
| Parameters | |
|---|---|
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Max Supply Current | 500μA |
| Turn On Delay Time | 150 ns |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 14pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 100Ohm |
| Height | 3.94mm |
| Length | 19.56mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 900mW |
| Technology | CMOS |
| Number of Functions | 1 |
DG409AK Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. 16 pins are injected to the electronic part body. Multiplexers built on a SP4T switching circuit are built. The multiplexer consists of 2 circuits. There is 100Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 36V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. The voltage should be at least 5V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. It has a Drain to Source resistance of 100Ohm ohms.
DG409AK Features
4 Channels
Switch Circuit: SP4T
Drain-to-Source resistance: 100Ohm
DG409AK Applications
There are a lot of Vishay Siliconix DG409AK Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Digital cross connects (DSX-1)
- Low-Voltage
- High speed data transmission line cards
- Remote wireless modules
- Communication systems
- Power routing
- Transmit
- Data switching
- PDH Multiplexers
