DG409AK-E3
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 13V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 900mW |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 14pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Length | 19.305mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG409AK-E3 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Through Hole. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There are 16 pins injected into the electronic part body. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Analog switches have 100Ohm internal resistance. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 44V to a switch device. The lowest voltage fed to the electronic component should be 13V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. If you are using dual power supplies, you should attach at least 5V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. There are 8 inputs to be operated.
DG409AK-E3 Features
4 Channels
Switch Circuit: SP4T
DG409AK-E3 Applications
There are a lot of Vishay Siliconix DG409AK-E3 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Signal routing between systems
- SDH
- Digital cross connects (DSX-1)
- SONET
- Mechanical reed relay replacement
- Industrial and process control systems
- PCMCIA cards
- Sample-and-hold systems
- Battery-powered systems
