banner_page

DG409DJ+

150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG409DJ+
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 811
  • Description: 150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2002
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 175Ohm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 842mW
Technology CMOS
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DG409
Pin Count 16
Number of Channels 8
Number of Circuits 2
Max Supply Voltage 30V
Min Supply Voltage 5V
Operating Supply Current 500μA
Nominal Supply Current 16μA
Throw Configuration 4PST
Propagation Delay 175 ns
Turn On Delay Time 600 ns
Logic Function Multiplexer
Voltage - Supply, Single/Dual (±) 5V~30V ±5V~20V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 300 ns
Max Dual Supply Voltage 20V
On-State Resistance (Max) 100Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 9V
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 3pF 14pF
On-state Resistance Match-Nom 1.5Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 150ns, 150ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 1.5 Ω
Crosstalk -92dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Height 4.45mm
Length 19.43mm
Width 7.87mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DG409DJ+ Overview


Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. Use DG409 to search for variants of the digital switches. In this multiplexer, the internal resistance is 175Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 30V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. 5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 500μA. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 5V.

DG409DJ+ Features


8 Channels
Switch Circuit: SP4T
500μA Supply Current

DG409DJ+ Applications


There are a lot of Maxim Integrated DG409DJ+ Analog Switches & Multiplexers ICs applications.

  • Sample-and-hold systems
  • Signal routing between systems
  • Video signal routing
  • CSU
  • Precision test equipment
  • Digital cross connects (DSX-1)
  • Industrial and process control systems
  • Audio signal routing
  • Residential Gateways, Home Gateway/Router
  • Battery-powered systems

Write a review

Note: HTML is not translated!
    Bad           Good