DG409DY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 200μA |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Drain to Source Resistance | 40Ohm |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
DG409DY Overview
Shipping overseas is convenient due to the electrical component's packing in SOIC. Advanced packaging method Bulk is used to provide high reliability. 16 terminations have been made so far. As a result of its 4 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits number 2 make up this analogue multiplexer. In this multiplexer, the internal resistance is 100Ohm. You can find the functions of the 16 pins in the datasheets. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order to operate this switch device, it would need a current of 200μA. During operation, the multiplexer should not be exposed to a temperature above 85°C. There is 40Ohm resistance between Drain and Source for this electronic part. For the switch device to function, a voltage of 5V is required.
DG409DY Features
4 Channels
200μA Supply Current
Drain-to-Source resistance: 40Ohm
DG409DY Applications
There are a lot of Intersil (Renesas Electronics America) DG409DY Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Communications systems
- Avionics and Military Systems
- Multi-Line E1 Interface Cards
- Microwave transmission systems
- Channelized and Unchannelized DS3 applications
- Automatic test equipment
- Imaging
- PDH Multiplexers
- Industrial and process control systems
