DG409DY-E3

150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG409DY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 529
Description: 150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	100Ohm
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2003
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	40Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG409
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	5V
Operating Supply Current	1μA
Nominal Supply Current	10μA
Power Dissipation	600mW
Max Supply Current	500μA
Propagation Delay	160 ns
Turn On Delay Time	150 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	5V~36V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	14pF 25pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	20pC

DG409DY-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with DG409 if you are looking for variants. A 40Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. It would be sufficient to run this analogue multiplexer with 1μA current. Put voltage above 500μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 5V. The electrical component supports 8 inputs. There is 100Ohm Drain to Source resistance on this electronic part.