DG409DYZ
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 11W |
| Throw Configuration | 4PST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 9V |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
DG409DYZ Overview
Presented in SOIC, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Bulk. Total terminations are 16. The electronic part delivers high-quality output through its 2 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It has an internal resistance of 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. Dual, Single supply type digital switch with a low cost. It is recommended to use 5V as the lowest voltage for the electrical part. For this multiplexer to operate, 200μA current would be sufficient. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 5V. A voltage of 28V can be used to operate the electronic component. It is possible to operate 8 inputs. Don't forget the additional features of this electronic part, such as: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY. The switches should not operate in an environment where the temperature is higher than 85°C.
DG409DYZ Features
2 Channels
200μA Supply Current
Additional Features: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
DG409DYZ Applications
There are a lot of Intersil (Renesas Electronics America) DG409DYZ Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- ISDN NT1/TA
- Automatic test equipment
- Cable PC
- Intelligent PBX
- Medical Instrumentation
- Automotive applications
- Fiber In The Loop (FITL)
- Routers
- Audio and video switching
