DG409LDQ-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 17Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | VIDEO APPLICATION |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG409 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 700μA |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.7mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 29Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 20pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 55ns, 25ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 45ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DG409LDQ-E3 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. DG409 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 17Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 12V in normal situations. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. In order to operate this switch device, it would need a current of 700μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. When using dual power supplies, you should attach at least 3V. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION.
DG409LDQ-E3 Features
4 Channels
Switch Circuit: SP4T
700μA Supply Current
Additional Features: VIDEO APPLICATION
DG409LDQ-E3 Applications
There are a lot of Vishay Siliconix DG409LDQ-E3 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Power routing
- Multi-Line E1 Interface Cards
- Intelligent PBX
- Cellular phones
- Fiber In The Loop (FITL)
- Precision instrumentation
- E1 Multiplexer
- High-Voltage
- Relay replacements
