DG409LDQ-T1-E3

55ns, 25ns SP4T 29Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG409LDQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 672
Description: 55ns, 25ns SP4T 29Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	17Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Max Power Dissipation	650mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG409
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	700μA
Nominal Supply Current	10μA
Power Dissipation	650mW
Max Supply Current	500μA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	29Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7pF 20pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	55ns, 25ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-82dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60ns
Switch-off Time-Max	45ns
Drain to Source Resistance	30Ohm
Signal Current-Max	0.03A
Height	920μm
Length	5.07mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG409LDQ-T1-E3 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. DG409 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 17Ohm. For details about the functions of 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. For this digital switch to work, 700μA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 3V if you are using dual power supplies. Operating 8 inputs is required. This electrical component also includes additional features such as VIDEO APPLICATION. Drain to Source resistance is 30Ohm.