DG409LDY-E3

55ns, 25ns SP4T 29Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG409LDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 116
Description: 55ns, 25ns SP4T 29Ohm Analog Switches BREAK-BEFORE-MAKE DG409 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	17Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Max Power Dissipation	600mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG409
Pin Count	16
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	700μA
Nominal Supply Current	200μA
Power Dissipation	600mW
Max Supply Current	500μA
Propagation Delay	65 ns
Turn On Delay Time	150 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	29Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7pF 20pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	55ns, 25ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-82dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60ns
Drain to Source Resistance	40Ohm
Signal Current-Max	0.03A
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG409LDY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 16. A 4 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this multiplexer. Try searching with DG409 to find analog multiplexer variants. There is 17Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. There should be 2.7V voltage fed to the electrical part below 2.7V. This digital switch can be operated with a current of 700μA. A voltage higher than 500μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 3V if you are using dual power supplies. There are 8 inputs to be operated. This electronic part has additional features, such as: VIDEO APPLICATION. There is 40Ohm Drain to Source resistance on this electronic part.