DG409LDY-T1
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 600mW |
| Max Supply Current | 500μA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 29Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 20pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 55ns, 25ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Signal Current-Max | 0.03A |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 29Ohm |
| Terminal Finish | TIN LEAD |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 600mW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
DG409LDY-T1 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. 16 pins are injected to the electronic part body. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this switch device. Internally, this switch multiplexer has a resistance of 29Ohm. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2.7V is the lowest voltage the electrical component should receive. It may damage the digital multiplexer if the voltage is higher than 500μA. For this switch, a dual supply voltage is feasible, but it must not exceed 6VThe voltage should be at least 3V if you are using dual power supplies. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. In order to operate the 8 inputs, there are several steps to follow. This electronic part has additional features, such as: VIDEO APPLICATION.
DG409LDY-T1 Features
4 Channels
Switch Circuit: SP4T
Additional Features: VIDEO APPLICATION
DG409LDY-T1 Applications
There are a lot of Vishay Siliconix DG409LDY-T1 Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Mechanical reed relay replacement
- Cable PC
- Routers
- Fault Tolerant Systems
- Public switching systems
- Medical systems
- Industrial and process control systems
- PCMCIA cards
- Avionics test equipment
