DG409LDY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 17Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | VIDEO APPLICATION |
| Max Power Dissipation | 600mW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG409 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 700μA |
| Power Dissipation | 600mW |
| Max Supply Current | 500μA |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 29Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 20pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 55ns, 25ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -82dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Signal Current-Max | 0.03A |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
DG409LDY-T1-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SP4T switching circuits. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with DG409. There is 17Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Users should never supply a voltage higher than 12V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. In order for the electronic part to function properly, the lowest voltage should be 2.7V. The analogue multiplexer could operate on 700μA current. Putting voltage greater than 500μA on the multiplexer may cause damage. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. The voltage should be at least 3V if you are using dual power supplies. Among the inputs that can be operated are the 8 inputs. This electronic part has additional features, such as: VIDEO APPLICATION.
DG409LDY-T1-E3 Features
4 Channels
Switch Circuit: SP4T
700μA Supply Current
Additional Features: VIDEO APPLICATION
DG409LDY-T1-E3 Applications
There are a lot of Vishay Siliconix DG409LDY-T1-E3 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- SONET
- Signal routing between systems
- Precision test equipment
- Avionics
- FTTH
- DSLAMs
- Automatic test equipment
- High reliability control systems
- SDH
