DG411AK
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-CERDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 900mW |
| Operating Supply Voltage | 44V |
| Number of Circuits | 4 |
| Max Supply Current | 1μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 5V~44V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| On-State Resistance (Max) | 35Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Crosstalk | -85dB @ 1MHz |
| Drain to Source Resistance | 35Ohm |
| Height | 3.94mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DG411AK Overview
Packed in 16-CDIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -55°C~125°C TA. A SPST - NC switching circuit is used to build these analog multiplexers. Circuits number 4 make up this analogue multiplexer. In this multiplexer, the internal resistance is 35Ohm. To find out what the 16 pins do, please refer to the datasheets. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It may damage the digital multiplexer if the voltage is higher than 1μA. Operating voltages range from 44V. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. There is 35Ohm resistance between Drain and Source for this electronic part. Suppliers are offering a 16-CERDIP package.
DG411AK Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 35Ohm
DG411AK Applications
There are a lot of Vishay Siliconix DG411AK Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Fiber to the Home
- Digital cross connects (DSX-1)
- E1 Multiplexer
- Medical Instrumentation
- Channelized and Unchannelized DS3 applications
- Precision data acquisition
- SDH/SONET multiplexers
- Ultrasound
- Cross Connects
