DG411CY+

175ns, 145ns SPST - NC 45Ohm Analog Switches BREAK-BEFORE-MAKE DG411 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG411CY+
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 655
Description: 175ns, 145ns SPST - NC 45Ohm Analog Switches BREAK-BEFORE-MAKE DG411 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	80Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG411
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	512/+-15V
Number of Channels	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Operating Supply Current	100pA
Nominal Supply Current	5μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	220 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	3 Ω (Max)
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	175ns
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA

DG411CY+ Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. The electrical component body receives 16 pins. A SPST - NC switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with DG411 if you are looking for variants. There is 80Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 10V. This digital switch can be operated with a current of 100pA. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. The electronic component can function from 20V.