DG411DY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 512/+-15V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 100pA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Drain to Source Resistance | 25mOhm |
| Normal Position | NC |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG411DY Overview
Shipping overseas is convenient with the electronic component packed in SOIC. This high-reliability packaging method uses advanced packaging methods Bulk. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. This electrical component is included in the 16 series of products. This digital multiplexer has 80Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. An operating current of 100pA would be sufficient for this switch device. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A temperature above 85°C is not suitable for operation of the analogue multiplexer. There is 25mOhm Drain to Source resistance on this electronic part. 4-bit operation is possible. Providing power to the analogue multiplexer requires a voltage of 5VV.
DG411DY Features
1 Channels
100pA Supply Current
Drain-to-Source resistance: 25mOhm
4-Bit
DG411DY Applications
There are a lot of Intersil (Renesas Electronics America) DG411DY Analog Switches & Multiplexers ICs applications.
- Central office
- Public switching systems
- Relay replacements
- New designs requiring multiplexer functions
- Wireless Local Loop
- Optical Applications
- Automatic test equipment
- Audio signal routing
- Fault Tolerant Systems
- Channel Banks
