DG411LDY
| Parameters | |
|---|---|
| Pin Count | 16 |
| Power Supplies | 3/12/+-5V |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 650mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 50 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 35 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 17Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 19ns, 12ns |
| Charge Injection | 5pC |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 85ns |
| Normal Position | NC |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 17Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Output | SEPARATE OUTPUT |
DG411LDY Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NC switching circuits. In this multiplexer, the internal resistance is 17Ohm. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2.7V. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. With dual power supplies, you should attach at least 3V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Among the inputs that can be operated are the 4 inputs.
DG411LDY Features
Switch Circuit: SPST - NC
-3db Bandwidth: 280MHz
DG411LDY Applications
There are a lot of Vishay Siliconix DG411LDY Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- DVD-R
- Cross Connects
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- USB 1.1 signal switching circuits
- Medical
- Channelized and Unchannelized DS3 applications
- Communication systems
- DSUs
- Microprocessor Controlled Analog Systems
