DG412HSDY-E3

105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG412HSDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 823
Description: 105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Min Supply Voltage	13V
Operating Supply Current	1μA
Power Dissipation	600mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	105 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	105 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	91 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	105ns, 80ns
Charge Injection	22pC
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	90ns
Normal Position	NO
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	80Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG412
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	44V

DG412HSDY-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. If you are looking for variants of the digital switch, trying search with DG412. Internally, this switch multiplexer has a resistance of 80Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 13V. For this multiplexer to operate, 1μA current would be sufficient. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 7V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 15V. There are 4 inputs to be operated.