DG412LDJ-E3
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 900mW |
| Base Part Number | DG412 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Power Dissipation | 900mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 85 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 17Ohm |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 19ns, 12ns |
| Charge Injection | 5pC |
| Crosstalk | -95dB @ 1MHz |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
DG412LDJ-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. Due to its 4 channels, the electrical component produces high-quality output. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A 4 circuit is present in this switch device. Use DG412 to search for variants of the digital switches. In this multiplexer, the internal resistance is 50Ohm. Datasheets for 16 pin functions are available upon request. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2.7V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1μA. A voltage higher than 1μA may cause damage to the switch multiplexer. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 3V to your dual power supply. Operating the 4 inputs requires 4 inputs. Temperatures above 85°C should not be used to operate the switches. The analogue multiplexer has 4 outputs. Suppliers offer the 16-PDIP package.
DG412LDJ-E3 Features
4 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz
DG412LDJ-E3 Applications
There are a lot of Vishay Siliconix DG412LDJ-E3 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Communication systems
- Access Concentrators
- DSUs
- Avionics test equipment
- Medical Instrumentation
- Optical Applications
- PCMCIA cards
- PDAs
- Cable PC
