DG412LDY-T1-E3

19ns, 12ns SPST - NO 17Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG412LDY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 690
Description: 19ns, 12ns SPST - NO 17Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	50Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	650mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG412
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/12/+-5V
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	20nA
Power Dissipation	650mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	17Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	19ns, 12ns
Charge Injection	5pC
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60ns
Normal Position	NO
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG412LDY-T1-E3 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. The analog switch ics are built using SPST - NO switching circuits. Try searching with DG412 if you're looking for variants. Internally, this switch multiplexer has a resistance of 50Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 12V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2.7V should be the lowest voltage fed to the electronic component. 1μA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. With dual power supplies, you should attach at least 3V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There are 4 inputs to be operated.