DG413DJ-E3

175ns, 145ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE DG413 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG413DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 956
Description: 175ns, 145ns SPST - NO/NC 35Ohm Analog Switches BREAK-BEFORE-MAKE DG413 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Number of Terminations	16
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	265
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG413
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	1μA
Nominal Supply Current	100pA
Power Dissipation	470mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~44V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Drain to Source Resistance	25Ohm
Height	3.81mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)

DG413DJ-E3 Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. SPST - NO/NC switching circuits are used in these analog switch ics. Using the DG413 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 35Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 13V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. This electrical part is compatible with 15V operating voltages. The 4 inputs need to be operated in order to work. The Drain to Source resistance of this electronic component is 25Ohm.