DG413FDJ+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 85Ohm |
| Max Power Dissipation | 842mW |
| Base Part Number | DG413 |
| Operating Supply Voltage | 18V |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 355μA |
| Max Supply Current | 600μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 250 ns |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 15pF 47pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -105dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG413FDJ+ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. There are 4 circuits in this switch device. DG413 can be used to search for analog multiplexer variants. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. The datasheets for the 16 pins explain the functions. Multiplexers should not be powered above 36V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 9V. The switch multiplexer may be damaged if it is exposed to voltage greater than 600μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 18V voltage levels.
DG413FDJ+ Features
Switch Circuit: SPST - NO/NC
DG413FDJ+ Applications
There are a lot of Maxim Integrated DG413FDJ+ Analog Switches & Multiplexers ICs applications.
- Cable PC
- PCMCIA cards
- Mechanical reed relay replacement
- Medical Instrumentation
- Optical Applications
- HDTV
- Fiber to the Home
- Private Branch Exchange (PBX)
- Video switching
- Remote wireless modules
