DG413LDJ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-DIP |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 900mW |
| Base Part Number | DG413 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 900mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 85 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 17Ohm |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 19ns, 12ns |
| Charge Injection | 5pC |
| Crosstalk | -95dB @ 1MHz |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DG413LDJ-E3 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. This electronic part offers high-quality output due to its 4 channels. Based on SPST - NO/NC switching circuits, these analog multiplexers work. 4 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with DG413. A 50Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2.7V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 1μA. It may damage the digital multiplexer if the voltage is higher than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. The voltage should be at least 3V if you are using dual power supplies. Operating 4 inputs is required. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analogue multiplexer has 4 outputs. Suppliers offer a 16-DIP package.
DG413LDJ-E3 Features
4 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
-3db Bandwidth: 280MHz
DG413LDJ-E3 Applications
There are a lot of Vishay Siliconix DG413LDJ-E3 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Video switching
- Medical Instrumentation
- Residential Gateways, Home Gateway/Router
- 65 V DACs
- T1/E1 Terminals
- Multiplexers
- Wireless Local Loop
- Automotive applications
- HDTV
