DG413LDY-E3

19ns, 12ns SPST - NO/NC 17Ohm Analog Switches BREAK-BEFORE-MAKE DG413 16 Pins 250pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG413LDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 226
Description: 19ns, 12ns SPST - NO/NC 17Ohm Analog Switches BREAK-BEFORE-MAKE DG413 16 Pins 250pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	33Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	650mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG413
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	650mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	50 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	17Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	19ns, 12ns
Charge Injection	5pC
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60ns
Drain to Source Resistance	30Ohm
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)

DG413LDY-E3 Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. SPST - NO/NC switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with DG413. An switch multiplexer with 33Ohm internal resistance has a value of 33Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 2.7V as the lowest voltage for the electrical part. This multiplexer would work with 1μA current. When the digital multiplexer is charged above 1μA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using a dual power supply, you should attach at least 3V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A 4 input needs to be operated. There is 30Ohm resistance between Drain and Source for this electronic part.