DG413LEDQ-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 26Ohm |
| Terminal Finish | Pure Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 26Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 6.6pC |
| Crosstalk | -114dB @ 1MHz |
| Switch-on Time-Max | 60ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
DG413LEDQ-T1-GE3 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. Unlike digital switches, these are based on SPST - NO/NC switching circuits. It consists of 4 circuits. A 26Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions.
DG413LEDQ-T1-GE3 Features
1 Channels
Switch Circuit: SPST - NO/NC
DG413LEDQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG413LEDQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Cellular phones
- E1 Multiplexer
- ISDN NT1/TA
- Battery-powered systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Video switching
- Private Branch Exchange (PBX)
- Audio/video switches
- Sample-and-hold systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
