DG417DJ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Base Part Number | DG417 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 100pA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω (Max) |
| Crosstalk | -85dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG417DJ Overview
The electrical component comes in 8-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. This electronic part can be found in the 8 series. The analog switch ics are built using SPST - NC switching circuits. This multiplexer is composed of 1 circuits. Use DG417 to search for variants of the digital switches. As far as internal resistance is concerned, it has 100Ohm. Users should never supply a voltage higher than 30V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 10V. The switch device would be able to operate with 100pA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. It can conduct 2-bit signals.
DG417DJ Features
Switch Circuit: SPST - NC
100pA Supply Current
2-Bit
DG417DJ Applications
There are a lot of Maxim Integrated DG417DJ Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Access Concentrators
- Frame Relay Equipment
- Battery Powered Instruments
- Audio and video switching
- DSLAMs
- Industrial control systems
- Digital access cross connects
- Isolation
- Industrial and process control systems
