DG417LDY-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 20Ohm |
| Max Power Dissipation | 400mW |
| Pin Count | 8 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 41 ns |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 32 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 20Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 43ns, 31ns |
| Charge Injection | 1pC |
| Crosstalk | -71dB @ 1MHz |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG417LDY-T1 Overview
As the electronic part is packed in 8-SOIC (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. The electrical component body receives 8 pins. The analog switch ics are built using SPST - NC switching circuits. The internal resistance of this digital multiplexer is 20Ohm. The datasheets for the 8 pins explain the functions. A voltage higher than 12V should not normally be supplied to the switches. A cost-effective Dual, Single supply type analogue multiplexer. 2.7V is the lowest voltage the electrical component should receive. A voltage higher than 1μA may cause damage to the switch multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. With dual power supplies, you should attach at least 3V. Among the inputs that can be operated are the 1 inputs.
DG417LDY-T1 Features
Switch Circuit: SPST - NC
DG417LDY-T1 Applications
There are a lot of Vishay Siliconix DG417LDY-T1 Analog Switches & Multiplexers ICs applications.
- Industrial
- DSLAMs
- Cell phones
- Channelized and Unchannelized DS3 applications
- Switching Systems
- Medical Instrumentation
- Frame Relay Equipment
- Access Concentrators
- SDH
- Multi-Line E1 Interface Cards
