Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Weight |
139.989945mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
20Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
VIDEO APPLICATION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
320mW |
Technology |
BICMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DG418 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Power Dissipation |
320mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
41 ns |
Number of Inputs |
1 |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±3V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
32 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
20Ohm |
Min Dual Supply Voltage |
3V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
71 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
43ns, 31ns |
Charge Injection |
1pC |
Crosstalk |
-71dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
44ns |
Switch-off Time-Max |
33ns |
Normal Position |
NO |
Height |
850μm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
DG418LDQ-T1-E3 Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 8 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Search with DG418 if you are looking for analog multiplexer variants. An switch multiplexer with 20Ohm internal resistance has a value of 20Ohm. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 2.7V. For this digital switch to work, 1μA current would suffice. When the digital multiplexer is charged above 1μA, damage can occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. For dual power supplies, a voltage of at least 3V should be attached. A 1 input needs to be operated. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION.
DG418LDQ-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Additional Features: VIDEO APPLICATION
DG418LDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG418LDQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Digital access cross connects
- CSU
- Remote Powered Equipment
- Industrial and process control systems
- T1/E1 Terminals
- 65 V DACs
- Precision test equipment
- Audio and video signal routing
- Industrial control systems