Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
540.001716mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
20Ohm |
Terminal Finish |
MATTE TIN |
Additional Feature |
VIDEO APPLICATION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
400mW |
Technology |
BICMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DG418 |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Nominal Supply Current |
20nA |
Power Dissipation |
400mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
41 ns |
Number of Inputs |
1 |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±3V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
32 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
20Ohm |
Min Dual Supply Voltage |
3V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
71 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
43ns, 31ns |
Charge Injection |
1pC |
Crosstalk |
-71dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
44ns |
Switch-off Time-Max |
33ns |
Drain to Source Resistance |
20Ohm |
Normal Position |
NO |
Height |
1.55mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DG418LDY-E3 Overview
As the electronic part is packed in 8-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Totally, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 8 series is equipped with this electronic component. A SPST - NO switching circuit is used to build these analog multiplexers. DG418 can be used to search for analog multiplexer variants. A 20Ohm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. A low voltage of 2.7V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. Put voltage above 1μA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. It is recommended that you attach at least 3V to your dual power supply. The 1 inputs need to be operated in order to work. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. There is 20Ohm resistance between the Drain and Source on this part.
DG418LDY-E3 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 20Ohm
DG418LDY-E3 Applications
There are a lot of Vishay Siliconix DG418LDY-E3 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Relay Replacement
- Imaging
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SONET/SDH ADM
- Switching Systems
- Avionics
- SDH
- Signal routing between systems
- Audio signal routing