DG419AK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-CERDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2017 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 600mW |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Power Dissipation | 600mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 175 ns |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 60pC |
| Drain to Source Resistance | 35Ohm |
| Height | 3.94mm |
| Length | 10.16mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG419AK Overview
Presented in 8-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. The electronic part delivers high-quality output through its 1 channels. Unlike digital switches, these are based on SPDT switching circuits. It consists of 1 circuits. Analog switches have 35Ohm internal resistance. The datasheets for the 8 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 13V should be applied to the electronic component. When the digital multiplexer is charged above 1μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. The 1 inputs need to be operated in order to work. In an environment with a temperature higher than 125°C, the digital switches should not operate. Resistivity from Drain to Source is 35Ohm for this electronic part. An output of 2 is provided by the digital multiplexer. 8-CERDIP package is offered by suppliers.
DG419AK Features
1 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 35Ohm
DG419AK Applications
There are a lot of Vishay Siliconix DG419AK Analog Switches & Multiplexers ICs applications.
- HDTV
- Communication systems
- Sample hold systems
- E1 Multiplexer
- Data switching
- Battery Powered Instruments
- Channelized and Unchannelized DS3 applications
- T1/E1 Terminals
- Audio and video routing
- Relay replacements
