Parameters |
Lead Free |
Lead Free |
Mounting Type |
Through Hole |
Package / Case |
8-CDIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Published |
2016 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
25Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Voltage - Supply, Single/Dual (±) |
12V ±15V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
25Ohm |
Min Dual Supply Voltage |
7V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
82 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
12pF 12pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
89ns, 80ns |
Charge Injection |
38pC |
Crosstalk |
-88dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
96ns |
Switch-off Time-Max |
96ns |
Normal Position |
NO/NC |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
DG419BAK-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-CDIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexer and demultiplexer circuits have a number 2:1. Temperatures around -55°C~125°C TA are extended for operation. Totally, there are 8 terminations. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 8 pins. Multiplexers built on a SPDT switching circuit are built. It consists of 1 circuits. There is 25Ohm internal resistance in this digital multiplexer. The functions of 8 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. 13V is the lowest voltage that should be fed to the electronic electronic part. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. If you are using a dual power supply, you should attach at least 7V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
DG419BAK-E3 Features
1 Channels
Switch Circuit: SPDT
DG419BAK-E3 Applications
There are a lot of Vishay Siliconix DG419BAK-E3 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Medical systems
- Industrial control systems
- Sample hold systems
- Battery Powered Instruments
- USB 1.1 signal switching circuits
- High speed data transmission line cards
- Industrial and process control systems
- Optical Applications
- Digital access cross connects