DG419DJ
| Parameters | |
|---|---|
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG419 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω (Max) |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
DG419DJ Overview
Presented in 8-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 8 pins. A SPDT switching circuit is used for these analog switches. There are 1 circuits in this multiplexer. DG419 can be used to search for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here.
DG419DJ Features
1 Channels
Switch Circuit: SPDT
DG419DJ Applications
There are a lot of Maxim Integrated DG419DJ Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Avionics test equipment
- Routers
- Medical Instrumentation
- Switching Systems
- Residential Gateways, Home Gateway/Router
- Fault Tolerant Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Communications systems
- New designs requiring multiplexer functions
