DG419DY-E3

175ns, 145ns SPDT 35Ohm Analog Switches BREAK-BEFORE-MAKE DG419 8 Pins 250pA 15V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG419DY-E3
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 299
Description: 175ns, 145ns SPDT 35Ohm Analog Switches BREAK-BEFORE-MAKE DG419 8 Pins 250pA 15V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	35Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	265
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG419
Pin Count	8
Number of Outputs	2
Operating Supply Voltage	15V
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	44V
Min Supply Voltage	13V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Power Dissipation	400mW
Max Supply Current	1μA
Propagation Delay	175 ns
Turn On Delay Time	175 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	7V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	60pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	20Ohm
On-State Resistance	20Ohm
Height	1.75mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG419DY-E3 Overview

As the electronic part is packed in 8-SOIC (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 8 series. A SPDT switching circuit is used for these analog switches. Try searching for DG419 variants of the analog switch ic. As far as internal resistance is concerned, it has 35Ohm. Datasheets for 8 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 44V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 13V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 1nA. It may damage the digital multiplexer if the voltage is higher than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. When using dual power supplies, you should attach at least 7V. Operating voltages of 15V are compatible with the electrical part. The 1 inputs need to be operated in order to work. Resistivity from Drain to Source is 20Ohm for this electronic part. In this digital multiplexer, there are 2 outputs.