DG419LDY

43ns, 31ns SPDT 20Ohm Analog Switches BREAK-BEFORE-MAKE 8 Pins 1nA 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG419LDY
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 244
Description: 43ns, 31ns SPDT 20Ohm Analog Switches BREAK-BEFORE-MAKE 8 Pins 1nA 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Power Dissipation	400mW
Max Supply Current	1μA
Turn On Delay Time	41 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	32 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	20Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	43ns, 31ns
Charge Injection	1pC
Crosstalk	-71dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Drain to Source Resistance	35Ohm
Normal Position	NO/NC
Height	1.55mm
Length	5mm
Width	4mm
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	20Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	BICMOS
Terminal Form	GULL WING
Number of Functions	1
Reach Compliance Code	unknown
Pin Count	8
Number of Outputs	2
Qualification Status	Not Qualified

DG419LDY Overview

This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. A total of 8 pins are injected into the body of the electronic part. A SPDT switching circuit is used to build these analog multiplexers. An switch multiplexer with 20Ohm internal resistance has a value of 20Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V should be the lowest voltage fed to the electronic component. Putting voltage greater than 1μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. For dual power supplies, a voltage of at least 3V should be attached. A 1 input needs to be operated. A Drain to Source resistance of 35Ohm is shown for this electronic part. 2 outputs are included in the analogue multiplexer.