Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1997 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
362mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DG419 |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
9V |
Nominal Supply Current |
26μA |
Max Supply Current |
1μA |
Turn On Delay Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
9V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
210 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
35Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 8pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-86dB @ 1MHz |
Height |
950μm |
Length |
3.05mm |
Width |
3.05mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DG419LEUA+ Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 8 terminations. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 8 pins. A SPDT switching circuit is used for these analog switches. DG419 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 100Ohm. For functions related to 8 pins, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 9V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply.
DG419LEUA+ Features
1 Channels
Switch Circuit: SPDT
DG419LEUA+ Applications
There are a lot of Maxim Integrated DG419LEUA+ Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Medical systems
- Cross Connects
- Sample hold systems
- DVD-R
- Automotive applications
- Remote wireless modules
- Battery Powered Systems
- Cellular phones
- Transmit