Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
362mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DG419 |
Pin Count |
8 |
Operating Supply Voltage |
18V |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
9V |
Nominal Supply Current |
26μA |
Max Supply Current |
75μA |
Voltage - Supply, Single/Dual (±) |
9V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
35Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 8pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-86dB @ 1MHz |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DG419LEUA+T Overview
Shipping overseas is convenient with the electronic component packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, 8 terminations have occurred. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. There is an electrical component included in the 8 series. Unlike digital switches, these are based on SPDT switching circuits. A total of 1 circuits make up this switch device. DG419 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 100Ohm. Datasheets for 8 pin functions are available upon request. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 9V. When the digital multiplexer is charged above 75μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. A voltage of 18V can be used to operate the electronic component.
DG419LEUA+T Features
1 Channels
Switch Circuit: SPDT
DG419LEUA+T Applications
There are a lot of Maxim Integrated DG419LEUA+T Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Industrial
- Fault Tolerant Systems
- Wireless Local Loop
- USB 1.1 signal switching circuits
- Frame Relay Equipment
- Video signal routing
- Industrial and process control systems
- Imaging
- Access Concentrators