Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad |
Number of Pins |
16 |
Weight |
57.09594mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
90Ohm |
Terminal Finish |
PALLADIUM GOLD OVER NICKEL |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
850mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DG441 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Operating Supply Current |
5μA |
Power Dissipation |
850mW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
220 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
12V ±15V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
80Ohm |
Min Dual Supply Voltage |
7V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 4pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
220ns, 120ns |
Charge Injection |
-1pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-95dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height |
950μm |
Length |
4mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
DG441BDN-T1-E4 Overview
Presented in 16-VQFN Exposed Pad, this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Look for analog switch ic variants by searching with DG441. The internal resistance of this digital multiplexer is 90Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 13V. For this digital switch to work, 5μA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. There are SEPARATE OUTPUT outputs on this analog switch ic. It is possible to operate 4 inputs.
DG441BDN-T1-E4 Features
1 Channels
Switch Circuit: SPST - NC
5μA Supply Current
DG441BDN-T1-E4 Applications
There are a lot of Vishay Siliconix DG441BDN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Wireless Local Loop
- Remote Powered Equipment
- Battery-powered systems
- Signal routing between systems
- Cable PC
- Automatic test equipment
- Remote wireless modules
- Private Branch Exchange (PBX)
- Video switching