DG441DVZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Max Supply Current | 100μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 450 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 18V |
| Off-state Isolation-Nom | 60 dB |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 120ns |
| Normal Position | NC |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
DG441DVZ-T Overview
The electronic component is convenient to ship overseas because it is packed in a TSSOP. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is 160Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 5V should be applied to the electronic component. 15μA current would be enough for this multiplexer to operate. A voltage higher than 100μA may cause damage to the switch multiplexer. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 5V to your dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 28V. This electronic part has additional features, such as: IT CAN ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY. The switches should not operate in an environment where the temperature is higher than 85°C.
DG441DVZ-T Features
1 Channels
15μA Supply Current
Additional Features: IT CAN ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
DG441DVZ-T Applications
There are a lot of Intersil (Renesas Electronics America) DG441DVZ-T Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Automotive applications
- Relay replacements
- Medical systems
- High reliability control systems
- Transmit
- DVD-R
- USB 1.1 signal switching circuits
- Digital access cross connects
- ISDN NT1/TA
