DG441LDJ-E3

60ns, 35ns SPST - NC 30Ohm Analog Switches DG441 1nA 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG441LDJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 223
Description: 60ns, 35ns SPST - NC 30Ohm Analog Switches DG441 1nA 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Supplier Device Package	16-DIP
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2007
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	35Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	DG441
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	10μA
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	136 ns
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	30Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	60ns, 35ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	100mOhm
Crosstalk	-95dB @ 1MHz
Height	3.81mm
Length	21.33mm
Width	7.11mm
RoHS Status	ROHS3 Compliant

DG441LDJ-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Search with DG441 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 35Ohm. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 2.7V should be applied to the electronic component. An operating current of 10μA would be sufficient for this switch device. If you put voltage higher than 100μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. It is recommended that you attach at least 3V to your dual power supply. The switches should not operate in an environment where the temperature is higher than 85°C. 16-DIP package is offered by suppliers.