DG441LDQ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DG441 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Power Dissipation | 450mW |
| Throw Configuration | SPST |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±3V~6V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 6V |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 30Ohm |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 6pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 60ns, 35ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100mOhm |
| Crosstalk | -95dB @ 1MHz |
| RoHS Status | ROHS3 Compliant |
DG441LDQ-E3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. This electronic part offers high-quality output due to its 4 channels. These analog multiplexers are built based on SPST - NC switching circuits. This multiplexer is composed of 4 circuits. Using the DG441 search parameter, you can discover variants of the switch. A 35Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 10μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. The voltage should be at least 3V if you are using dual power supplies. Operating the 4 inputs requires 4 inputs. In an environment with a temperature higher than 85°C, the digital switches should not operate. Multiplexer ics with 4 outputs are available. It is offered by suppliers in package 16-TSSOP.
DG441LDQ-E3 Features
4 Channels
Switch Circuit: SPST - NC
10μA Supply Current
-3db Bandwidth: 280MHz
DG441LDQ-E3 Applications
There are a lot of Vishay Siliconix DG441LDQ-E3 Analog Switches & Multiplexers ICs applications.
- Industrial
- USB 1.1 signal switching circuits
- Mechanical reed relay replacement
- Switching Systems
- Audio signal routing
- PCMCIA cards
- Relay Replacement
- Audio and video signal routing
- E1 Network Equipment
- New designs requiring multiplexer functions
